This product is mainly used for sand factory, electric pole factory, work-site of building and concrete dam to wash, classifying and de-watering various sands.
This sand washer adopt inclination of 15°, under the water tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of sediment pool, this machine have three functions of washing, de-watering, classifying.
Washing: The sand is feeding into the sediment pool from the feeding box, acting by rotating screw blade, the sand is turning and rolling and grinding each other to eliminate impurity and water-air layer around sand to facilitate de-water. The fresh eater rising current from the porous plate carry foreign matter to water surface and overflow the weir plate, to finish washing processing
De-watering: The sand with bigger density is sunken down to tub bottom, the screw blade push this sand upwards, when passing through upper tub of proper length above water level, the water is draining into sediment pool from another drainage ditch, the de-watered sand is out from the discharging opening.
Classifying:Material classifying is realized by overflowing the non-needed fines, the controlling method is adjusting height of overflowing weir and adjusting speed of screw.
screw sand washing Specifications:
Models
XL-915
2XL-915
XL-1115
2XL-1115
XL-1370
Diameter of screw (mm)
915
915
1115
1115
1370
Length of tub (mm)
7585
7585
9782
9782
10363
Feed Size (mm)
≤10
≤10
≤10
≤10
≤10
Capacity (t/h)
100
200
175
350
250
Speed of screw (r/min)
21
21
17
17
14
Electric Motor Power(kW)
11
2x11
15
2x15
22
Water Consumption (t/h)
10-80
20-160
20-150
400-300
20-250
Dimension (mm)(L×B×H)
8500×
2810
×3600
8420×
3765
×3960
10970×
3945
×4720
10970×
5250
×4720
11420×
4458
×5326
Weight (kg)
6271
11110
10186
17941
15349
Note: If there is any modification, all parameter and overall dimension are subject to the operating Instructions.